Beltronics GX65 - GPS Radar, Laser Detector Manuel du propriétaire télécharger pdf (Page 16)

28 29

Explanation of Displays

No display The GX65 is in Dark mode. Press the BRT button to change the brightness.

(page 10)

PilotHWY One of the many Preferences. (pages 14-18)

Ka1 X9, The GX65 has been set to Threat Display Mode in Programming.

K9 X1, (pages 12-13)

Ka9 K2 X1, etc.

Reset The GX65 needs to cycle power. Unplug it from power socket and restart.

Power

Troubleshooting

Problem

The GX65 beeps brieﬂy at the same

location every day, but no radar

source is in sight.

The GX65 does not seem sensitive

to radar or laser.

The GX65 did not alert when a

police car was in view.

The GX65’s display is not working.

The GX65’s audible alerts are less

loud after the ﬁrst few alerts.

The GX65 bounces or sags on

windshield.

The GX65’s power-on sequence

reoccurs while you are driving.

Your 14-year old son has changed

all 8 of the Programming options.

The GX65 feels very warm.

Solution

• An X-band motion sensor or intrusion alarm is located

within range of your route. Use the AlertLock feature to

ﬁlter this signal out.

• Make sure that windshield wipers do not block

the GX65’s

radar antenna and that the laser lens is not behind tinted

areas.

• Determine if your vehicle has an Instaclear

ElectriClear

or solar reﬂective windshield which may

deﬂect radar or laser signals.

• The GX65 may be in City Mode.

• VASCAR (Visual Average Speed Computer and Recorder),

a stopwatch method of speed detection, may be in use.

• Ofﬁcer may not have radar or laser unit turned on.

• Press the BRT button to deactivate Dark Mode.

• The GX65 is in AutoMute Mode. See page 9 for details.

• The GX65 is not making contact with the windshield to

provide stability. While holding down

the GX65’s

EasyMount button, slide the GX65 further back toward the

windshield so that the back top edge makes ﬁrm contact.

• A loose power connection or dirty lighter socket can

cause

the GX65 to be brieﬂy disconnected.

• You can return all of the user Preferences to the factory

defaults settings by holding down the “SEN” and “BRT”

buttons while you turn the GX65 on.

• It is normal for

the GX65 to feel warm.

Problem

The GX65 will not turn on.

GPS indicator will not stop ﬂashing.

AlertLock lock ﬁlter does not seem

to be working.

At ﬁrst detect, numbers come up on

the display.

Solution

• Check that vehicle ignition is ON.

• Check that vehicle lighter socket is functional.

• Try

the GX65 in another vehicle.

• The GX65 does not have a clear view of the sky.

Reposition it or try it in another vehicle.

• Check to make sure the GPS button is on.

• SpeedCheck feature is on. You can turn it

off in Programming.

1 2 ... 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

Beltronics GX65 - GPS Radar, Laser Detector Manuel du propriétaire Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Détecteurs radar Beltronics GX65 - GPS Radar, Laser Detector