Beltronics Express 935 Spécifications télécharger pdf (Page 12)

as an option on some vehicles. This type of windshield makes

any dash, visor or windshield mounted detector ineffective.

(If in doubt, check with an appropriate dealership to see if

this applies to your vehicle.)

To achieve optimum performance, regardless of which mounting

position you choose, follow these basic steps:

1. Consider occupant safety when selecting a mounting location.

Choose a location where the unit will not be hazardous in

case of an accident.

2. For optimum detection, position your unit with a clear,

unobstructed view of the road from the front and rear.

3. Do not allow the unit to make contact with the windshield.

This will eliminate unnecessary vibration.

4. Avoid placing your unit in direct sunlight. During the summer,

interior temperatures of an enclosed vehicle can sometimes

reach temperatures that will cause premature aging of the unit.

5. Your detector is not waterproof; exposure to water may cause

damage.

Dash Mounting

1. Select an area that is relatively level, clean and dry. Adhere the

soft portion of the enclosed hook and loop fastener to this area

and the corresponding hard portion to the bottom of your unit.

2. Fasten unit to dash by placing hook and loop pieces together.

Windshield Mounting

1. Remove the mounting bracket cover on top of the unit by pressing

on the raised dots and pushing outward. Store the cover in a safe

place.

2. Clean the selected windshield area, position the suction-cup mount

on the windshield, and press firmly on each suction-cup to secure

it in place.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Beltronics Express 935 Spécifications Page 12