Beltronics BELV965 - Radar Detector With DSP High SENSIT Manuel du propriétaire télécharger pdf (Page 8)

Pilot HWY

Pilot t

Pilot V

Voice ON

Voice OFF

PwrOn STD

PwrOn FST

Meter STD

Meter TEC

aMute ON

aMute OFF

City STD

City LoX

City NoX

Bands DFT

Bands MOD

X ON or OFF (default is on)

K ON or OFF (default is on)

Ka ON or OFF (default is on)

POP ON or OFF (default is off)

LSR ON or OFF (default is on)

SWS ON or OFF (default is off)

TSR ON or OFF (default is off)

Programming

There are 7 user-selectable options so you

can customize your V995 for your own

preferences. The buttons labeled CITY and

BRT are also used to enter the Program

Mode, REVIEW your current program

settings, and to CHANGE any settings as

desired. The words PGM, RVW, and CHG are

located on the top of the detector, and are

highlighted in colored graphics. Pages 14-

16 explain each option in more detail.

How to use Programming

1 To enter Program Mode, press and

hold both the CITY and BRT buttons

down for 2 seconds. The unit will beep

twice, and will display the word Program.

2 Then press the RVW button to

review the current settings. You can

either tap the button to change from item

to item, or hold the button to scroll through

the items.

3 Press the CHG button to change

any setting. You can either tap the button

to change from setting to setting, or hold

the button to scroll through all the options.

4 To leave the Program Mode,

simply wait 8 seconds without

pressing any button, or press the PWR

button. The unit will display Complete,

beep 4 times, and return to normal

operation.

An example

Here is how you would turn your V995’s

AutoMute feature off.

1 Enter the Program Mode by holding

both the CITY and BRT buttons down for

2 seconds. The V995 will beep twice and

display Program.

2 Then hold the RVW button down. The

V995 will scroll through the categories,

starting with Pilot

(Pilot), Voice

(Voice), Power-on sequence (PwrOn),

Signal strength meter

(Meter), and then

AutoMute (aMut

e).

3 Release the RVW button when the

V995 shows the AutoMute item. Since the

factory setting is for AutoMute to be on,

the V995 will display aMute ON.

If you accidentally don’t release the

RVW button in time, and the V995 goes to

the next category, hold the RVW button

down again, and after your V995 scrolls

through all categories, it will begin again

at the top of the list.

4 Press the CHG button to change from

aMute ON to aMute OFF

5 To complete the Programming, simply

wait 8 seconds without pressing any

button, or press the PWR button. The V995

will display Complete, beep 4 times, and

return to normal operation.

12 13

Overview of Programming

* Factory Default Settings

To reset your V995 to its original

factory settings, press and hold

the “CITY” and “BRT” buttons

while turning the power on. The

V995’s display will provide a

Reset message, accompanied

by an audible alert,

acknowledging the reset.

Press the REVIEW button

to go from one

category to the next

PILOT

(Power-on indication)

VOICE

POWER-ON SEQUENCE

SIGNAL STRENGTH METER

AUTOMUTE

CITY MODE SENSITIVITY

BANDS

Press the CHANGE button

to change your setting

within a category

* Full word: Highway, AutoScan or City

Letter: H or A or C

Vehicle voltage

* Voice alerts on

Voice alerts oﬀ

* Standard power-on sequence

Fast power-on sequence

* Standard signal strength meter

Tech Display

* AutoMute on

AutoMute oﬀ

* Standard City mode sensitivity

Low X band sensitivity in City Mode

No X band sensitivity in City Mode

* All band enabled

One or more bands are disabled

Turn bands “ON” or “OFF” by

pressing the VOLUME•MUTE button

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Beltronics BELV965 - Radar Detector With DSP High SENSIT Manuel du propriétaire Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Détecteurs radar Beltronics BELV965 - Radar Detector With DSP High SENSIT